Machining
CNC machining centres, boring and turning in Mynämäki. A stated speciality is machining aluminium profiles.
The machine list published for machining covers vertical machining centres, 4- and 5-axis machines, a boring machine, and CNC and manual lathes. Series and single parts run on the same fleet.
- Benefit
- Dimensions and setups can be matched to welding and assembly without a separate subcontract chain.
- Materials
- Published speciality: aluminium profiles. Other materials are agreed in the quote.
- Methods
- Milling, boring, turning and manual machining.
- Typical use
- Dimensionally accurate parts for machine building, singles and small batches.
- Quality assurance
- ISO 9001 is the published quality system. Tolerances are confirmed from the drawing.
Capacity
WELE SB316 M
Mynämäki
- X 3060 mm
- Y 1600 mm
- Z 800 mm
AKIRA-SEIKI SV1350
Mynämäki
- X 1350 mm
- Y 640 mm
- Z 660 mm
Haas VF-5/40
Mynämäki
- X 1270 mm
- Y 600 mm
- Z 635 mm
- 5 axes
- 25 tool pockets
- 8100 rpm
Haas VF-3BHE
Mynämäki
- X 1016 mm
- Y 508 mm
- Z 635 mm
- 4 axes
Juarist TS-1
Mynämäki
- Vertical travel 1500 mm
- Cross travel 2000 mm
- Column travel 1100 mm
- Quill 600 mm
- Table 1120 × 1120 mm, 5000 kg
- 40 tool pockets
Tongtai Topper TD-2000Y
Mynämäki
- Swing 680 mm
- Over carriage 360 mm
- Length 530 mm
- Spindle bore 62 mm
Tongtai Topper TCS-2000
Mynämäki
- Swing 520 mm
- Over carriage 320 mm
- Length 400 mm
- Spindle bore 62 mm
Takisawa EX310
Mynämäki
- Swing 495 mm
- Over carriage 350 mm
- Length 710 mm
- Spindle bore 75 mm
Chevalier FCL-2580F
Mynämäki
- Over bed 630 mm
- Over carriage 400 mm
- Distance between centres 2000 mm
- Spindle bore 105 mm
Chevalier FCL-2160F
Mynämäki
- Over bed 540 mm
- Over carriage 310 mm
- Distance between centres 1500 mm
- Spindle bore 85 mm
Pinacho TSAF11-V
Mynämäki
- Manual lathe
Optimum TH-4210D
Mynämäki
- Manual lathe
Huvema HU4 VK-4
Mynämäki
- Milling machine, 2 units
Automaattinen sahauslinja
Mynämäki
- Model not published
Contacts
Jyri Koskinen
Tuotantopäällikkö
Hitsaus, koneistus, laserleikkaus, särmäys ja tarjouslaskenta
Jyri Koskinen
Tuotantopäällikkö
Hitsaus, koneistus, laserleikkaus, särmäys ja tarjouslaskenta
Isto Suni
Työnjohtaja
Koneistus, tarjouslaskenta ja työnsuunnittelu
Isto Suni
Työnjohtaja
Koneistus, tarjouslaskenta ja työnsuunnittelu
Jani Utrila
Työnjohtaja
Hitsaus, koneistus ja tarjouslaskenta
Jani Utrila
Työnjohtaja
Hitsaus, koneistus ja tarjouslaskenta