Laser cutting
Flatbed laser 1500 × 3000 mm and a 157-place sheet store. Steel, stainless, aluminium, brass and copper within published thicknesses.
TRUMPF TruLaser 3030 Fiber L49, 6+ kW BrightLine Fiber, cuts steel, aluminium and stainless or acid-resistant steel up to 25 mm, and brass and copper up to 10 mm. TruLaser 3030 L20 CoolLine, 5 kW, cuts steel to 25 mm, stainless to 15 mm and aluminium to 12 mm. Sheets can also be ground. In 2024 a Löwer DiscMaster deburring machine was added so stainless and acid-resistant sheets can be offered ground.
- Benefit
- The automatic store and LiftMaster Compact shorten handling between cuts.
- Materials
- Steel, stainless and acid-resistant steel, aluminium, brass, copper. Thicknesses depend on the machine.
- Methods
- Fibre laser and CO2 laser with CoolLine. Grinding and deburring separately.
- Typical use
- Sheet parts for machine building, including thick steel up to the published 25 mm.
- Quality assurance
- Timeka describes the mechanical accuracy of laser cutting as about ten times that of oxy-fuel or plasma cutting. The final tolerance is confirmed from the drawing.
Capacity
TRUMPF TruLaser 3030 Fiber L49
Mynämäki
- Power 6+ kW BrightLine Fiber
- Cutting area 1500 × 3000 mm
- LiftMaster Compact
- Automatic store, 157 places
- Steel 25 mm
- Aluminium 25 mm
- Stainless or acid-resistant 25 mm
- Brass 10 mm
- Copper 10 mm
TRUMPF TruLaser 3030 L20 CoolLine
Mynämäki
- Power 5 kW
- Cutting area 1500 × 3000 mm
- Steel 25 mm
- Stainless steel 15 mm
- Aluminium 12 mm
Löwer DiscMaster
- Deburring and grinding
- Site was not published
Contacts
Jyri Koskinen
Tuotantopäällikkö
Hitsaus, koneistus, laserleikkaus, särmäys ja tarjouslaskenta
Jyri Koskinen
Tuotantopäällikkö
Hitsaus, koneistus, laserleikkaus, särmäys ja tarjouslaskenta
Tero Raunio
Tuotantopäällikkö
Laserleikkaus, särmäys ja tarjouslaskenta
Tero Raunio
Tuotantopäällikkö
Laserleikkaus, särmäys ja tarjouslaskenta