Tube laser cutting
Adige LT 8.20. Round tube up to 240 mm and square up to 200 mm, feed length 6500 mm.
Tube and profile structures are cut in Mynämäki. The machine has automatic bundle loaders. Threading up to 12 mm. C, U and L profiles and H and I beams are in the published range. Maximum part weight is about 42 kg per metre. The machine entered production in summer 2021.
- Benefit
- Cutting, piercing and ends can be done in one setup. Timeka describes raw-material use as economical.
- Materials
- Tubes and profiles within the published sizes. The exact grade is agreed in the quote.
- Methods
- Tube laser, bundle feeding, threading up to 12 mm.
- Typical use
- Tube and profile structures for machine building.
- Quality assurance
- Timeka reports a burr-free end and that internal stresses in profiles are better controlled by laser cutting. A separate numeric tolerance has not been published.
Capacity
Adige LT 8.20
Mynämäki
- Feed length 6500 mm
- About 42 kg/m
- Round tube up to 240 mm
- Square up to 200 mm
- Threading up to 12 mm
- C, U and L profiles
- H and I beams
Contacts
Niko Setälä
Tuotantopäällikkö
Putkilaserleikkaus, myynti ja suunnittelu
Niko Setälä
Tuotantopäällikkö
Putkilaserleikkaus, myynti ja suunnittelu